ONT(OMCIv1)

 show equipment ont interface 1/1/3/5/1


configure equipment ont interface 1/1/3/5/1 sernum ALCL:F8612E96  voip-allowed enable sw-ver-pland  disabled


# admin state up


admin state up


exit .. 5 times


configure vlan id 40 mode residential-bridge new-broadcast enable new-secure-fwd enable in-qos-prof-name name:Default_TC1


configure vlan id 30 mode residential-bridge new-broadcast enable new-secure-fwd enable in-qos-prof-name name:Default_TC1


configure vlan id 30 

no vlan id 30



configure qos profiles bandwidth us_prof_voip_2pots_bw committed-info-rate 600 assured-info-rate 600 excessive-info-rate 600 delay-tolerance 8



configure qos interface 1/1/3/5/1/voip upstream-queue [0...7] bandwidth-profile name:us_prof_voip_2pots_bw


typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue [0...7] bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 0 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 1 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 2 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 3 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 4 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 5 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 6 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin># configure qos interface 1/1/3/5/1/voip upstream-queue 7 bandwidth-profile name:us_prof_voip_2pots_bw

typ:isadmin>#


configure bridge port 1/1/3/5/1/voip


 

typ:isadmin>configure>bridge>port>1/1/3/5/1/voip#

typ:isadmin>configure>bridge>port>1/1/3/5/1/voip# vlan-id 70

typ:isadmin>configure>bridge>port>1/1/3/5/1/voip>vlan-id>70$

vlan-id 30

no vlan-id 40


configure equipment ont slot 1/1/3/5/1/2 admin-state up planned-card-type pots plndnumdataports 0 plndnumvoiceports 2


configure voice ont  service   1/1/3/5/1/1 vlan  70 dhcp enabled  voip-mode  sip2  mgc-udp-port  5060  conf-file-name  temp_temp1.xml  ftp-user-name  automation  ftp-passwd  plain:hdr53atc


configure voice ont  service   1/1/3/5/1/1 vlan  40 dhcp enabled  voip-mode  sip2  mgc-udp-port  5060  conf-file-name  ranna_ansi_v2.xml  ftp-user-name  automation  ftp-passwd  plain:hdr53atc



configure voice ont  service   1/1/3/5/1/1 vlan  40 dhcp enabled  voip-mode  sip2  mgc-udp-port  5060  conf-file-name  temp_temp1.xml  ftp-user-name  automation  ftp-passwd  plain:hdr53atc



configure voice ont service 1/1/3/5/1/1 vlan 40 dhcp enabled voip-mode sip2 mgc-udp-port 5060 conf-file-name ranna_ansi_v2.xml ip-address 135.249.193.89 net-mask 255.255.255.192 default-router 135.249.193.65 conf-method omci


configure voice ont service 1/1/3/5/1/1 vlan 30 dhcp enabled voip-mode sip2 mgc-udp-port 5060 conf-file-name dp_ansi.xml ip-address 135.249.193.89 net-mask 255.255.255.192 default-router 135.249.193.65 conf-method omci





configure voice ont voice-port 1/1/3/5/1/2/[1...2] admin-state unlocked


typ:isadmin># configure voice ont voice-port 1/1/3/5/1/2/[1...2] admin-state unlocked

typ:isadmin># configure voice ont voice-port 1/1/3/5/1/2/1 admin-state unlocked

typ:isadmin># configure voice ont voice-port 1/1/3/5/1/2/2 admin-state unlocked

typ:isadmin>#








CONFIGURATION Removal


typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1# info

configure equipment ont

#------------------------------------------------------------------------------------------------------------------------------------------------------------

echo "equipment"

#------------------------------------------------------------------------------------------------------------------------------------------------------------

interface 1/1/3/5/1 sw-ver-pland disabled

  sernum ALCL:F8612E96

  subslocid WILDCARD

  fec-up disable

  sw-dnload-version disabled

  voip-allowed enable

  log-auth-pwd plain:******

  planned-us-rate nominal-line-rate

  admin-state up

exit

#------------------------------------------------------------------------------------------------------------------------------------------------------------

typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1# admin-state down

typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1#

typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1#

typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1#

typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1#


70/01/06 04:19:15 major alarm cleared for ont-card 1/1/3/5/1/2 (service affecting) : OLT or ONT did not accept the configuration request for the Card


typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1#


70/01/06 04:19:15 minor alarm cleared for ontpots 1/1/3/5/1/2/1 (service affecting) : POTS service provisioning Mismatch.ONT did not accept the configuration requests for POTS service

70/01/06 04:19:15 minor alarm cleared for ontpots 1/1/3/5/1/2/2 (service affecting) : POTS service provisioning Mismatch.ONT did not accept the configuration requests for POTS service


typ:isadmin>configure>equipment>ont>interface>1/1/3/5/1# exit

typ:isadmin>configure>equipment>ont# no interface 1/1/3/5/1



OMCIv2

--------


Deleting entire config(using TL1 CLI)

----------------------

SSH

userid: SUPERUSER

pwd: ANS#150

port: 1022


ED-ONT::ONT-1-1-3-4-1:::::OOS; 

DLT-ONT::ONT-1-1-3-4-1;


configure equipment ont interface 1/1/3/4/1 sernum ALCL:F870ED34 voip-allowed iphost sw-ver-pland disabled

admin-state up


configure qos interface 1/1/3/4/1/voip upstream-queue [0...7] bandwidth-profile name:us_prof_voip_2pots_bw2


configure bridge port 1/1/3/4/1/voip 

vlan-id 30

configure iphost ont ont:1/1/3/4/1/1 vlan 30


configure iphost ont ont:1/1/3/4/1/1 dhcp enabled


configure equipment ont slot 1/1/3/4/1/2 admin-state up planned-card-type pots plndnumdataports 0 plndnumvoiceports 2



configure voice ont uri-prof 50 name ftp_50 address <ftp://135.249.193.67/>

configure voice ont auth-sec-prof 20 name ftp_authsecprof20 user-name anonymous password plain:anonymous

configure voice ont sec-uri-profile 50 name ftp_securiprof50 auth-securi-prof 20 uri-prof 50


configure voice ont voip-config ont:1/1/3/4/1/1 protocol sip


configure voice ont uri-prof 51 name uri_proxy51 address 135.249.193.67:5070

configure voice ont uri-prof 52 name uri_inea52 address 135.249.193.67:5070


configure voice ont auth-sec-prof 9 name authsec_inea9 user-name anonymous password plain:anonymous

configure voice ont sec-uri-profile 15 name securi_sswinea15 uri-prof 51 auth-securi-prof 9


configure voice ont sip-config ont:1/1/3/4/1/1 proxyserv-prof 51 outproxyserv-prof 51 aor-host-prt-prof 51 registrar-prof 15 uri-format sip-uri


configure voice ont rtp-profile 10 name rtp_tone-dtmf10 tone-event enabled dtmf-event enabled


configure voice ont voip-media-prof 10 name Media_10__dtmf-tone voiceserviceprof 10 rtp-prof 10 codec1st pcma pkt-period1st 10 codec2nd pcma pkt-period2nd 10 codec3rd pcma pkt-period3rd 10 codec4th pcma pkt-period4th 10


configure voice ont voip-app-service 2 name Voip_Appl_Service_2 calling-number enable call-waiting enable callerid-announce enable three-way-calling enable call-transfer enable call-hold enable call-park enable mwi-spl-dialtone enable mwi-visual-indi enable dir-conn-prof none bridge-prof none conf-prof none


1 is Already present as below so used 2:-

voip-app-service 1 name voipappserv_prof_1

  calling-number enable

  calling-name enable

  caller-id-number private

  caller-id-name private

  call-waiting enable

  three-way-calling enable

  call-transfer enable

  call-hold enable

  call-park enable

  mwi-spl-dialtone enable

  mwi-visual-indi enable

  call-fwd-indicate enable

  dir-conn-prof none

  bridge-prof none

  conf-prof none

exit


configure voice ont voice-sip-port 1/1/3/4/1/2/1 user-aor guru12 display-name guru12 val-scheme md5-digest user-name guru12 password plain:guru12 voice-mail-prof none app-serv-prof 2



configure voice ont voice-port 1/1/3/4/1/2/1 custinfo User1 voipconfig sip pots-pwr-timer 300 rx-gain -7.000000 voip-media-prof 10 ne-file-name dp_test.xml admin-state unlocked



configure voice ont voice-sip-port 1/1/3/4/1/2/2 user-aor guru13 display-name guru13 val-scheme md5-digest user-name guru13 password plain:guru13 voice-mail-prof none app-serv-prof 2


configure voice ont voice-port 1/1/3/4/1/2/2 custinfo User2 voipconfig sip pots-pwr-timer 300 rx-gain -7.000000 voip-media-prof 10 ne-file-name dp_test.xml admin-state unlocked


to delete voice-sip-port

-------------------------


configure voice ont voice-port 1/1/3/4/1/2/1 admin-state locked 

configure voice ont voice-port 1/1/3/4/1/2/2 admin-state locked 


for making call

---------------

admin voice ont pots sip-dial-tone 1/1/3/4/1/2/1 sip-phone-number 9994004 diagnostic test_initiated 



admin voice ont pots sip-dial-tone 1/1/3/4/1/2/2 sip-phone-number 9994004 diagnostic test_initiated

OR

admin voice ont pots sip-dial-tone 1/1/3/4/1/2/2 sip-phone-number 9994003 diagnostic test_initiated


To check for it is working or not

---------------------------

show voice ont pots sip-dial-tone

show voice ont pots operational-data 


for overwriting voice-port & sip port

-----------------

configure voice ont voice-port 1/1/3/4/1/2/1 admin-state locked


configure voice ont voice-port 1/1/3/4/1/2/2 admin-state locked


configure voice ont voice-sip-port 1/1/3/4/1/2/1 user-aor guru12 display-name guru12 val-scheme md5-digest user-name guru12 password plain:guru12 voice-mail-prof none app-serv-prof 2




FTP

----

tftp -i 135.249.23.36  PUT G240GA_OMCIV2.xml /ONT/G240GA_OMCIV2.xml



Comments

Post a Comment

Popular posts from this blog

VECPP.c

#include <tape_t.h> #include <string_t.h> #include <tuple_t.h> #include <bool_t.h> /**** first design #include, #define VAR, #define FUNC() and #ifdef, #elif and #endif *****/ enum MacroType {     define_t,     include_t,     line_t,     undef_t,     error_tt,     pragma_t,     defined_t,     if_t,     ifdef_t,     ifndef_t,     elif_t,     else_t,     endif_t,     COMPILER_DATA,     UNDEFINED,     MAX_TYPE }; MacroType getIndexFromStr(string_t s) {     string_t tmp;     char* arr[13] = { "define","include","line","undef","error","pragma","defined","if","ifdef","ifndef","elif","else","endif" };     for(int i=0; i< 13; i++)     {         tmp = string(arr[i]);         if((compare(tmp,s)) == 0)         ...
Read more

Comparision with Quick Sort

 #include <iostream> #include <vector> #include <map> #include <climits> #include <chrono>  // Added for timing using namespace std; using namespace std::chrono;  // Added for chrono #define MAP_SIZE USHRT_MAX #define OFFSET MAP_SIZE/2 void Map_sort(vector<int> &nums) {     vector<int> temp;     int arr[MAP_SIZE] = {0};     int maxElement = SHRT_MIN;     int minElement = SHRT_MAX;          for(int i=0; i<nums.size(); i++) {         if(nums[i] > maxElement) maxElement = nums[i];         if(nums[i] < minElement) minElement = nums[i];         arr[nums[i]+OFFSET]++;     }          int j=0;     for(int i=minElement; i<= maxElement; i++) {         if(arr[i+OFFSET] >= 1) {              for(int coun...
Read more

Interview questions

Orion Innovations class A {           public:     A()     {         printf("A def ctor\n");     }     ~A()     {         printf("~A def dector\n");     }     char ac; }; static A statObject; int main() {     printf("Size of A = %d\n", sizeof(A));     printf("main()\n"); } //===================== //output: here // A def ctor Size of A = 1 main() ~A def dector struct A {     A() { cout << "A" << endl; }     ~A() { cout << "~A" << endl; } }; struct B {     B() { cout << "B" << endl; }     ~B() { cout << "~B" << endl; } }; struct D {     D( D& d ) { cout << "&D" << endl; }     D() { cout << "D" <...
Read more